SB2025042830 - Multiple vulnerabilities in IBM webMethods Managed File Transfer
Published: April 28, 2025 Updated: November 28, 2025
Breakdown by Severity
- Low
- Medium
- High
- Critical
Description
This security bulletin contains information about 85 secuirty vulnerabilities.
1) Input validation error (CVE-ID: CVE-2024-2004)
The vulnerability allows a remote attacker to bypass certain security restrictions.
The vulnerability exists due to an error when a protocol selection parameter option disables all protocols without adding any. As a result, the default set of protocols would remain in the allowed set due to an error in the logic for removing protocols.
2) Buffer overflow (CVE-ID: CVE-2023-4911)
The vulnerability allows a local user to escalate privileges on the system.
3) Buffer overflow (CVE-ID: CVE-2023-29491)
The vulnerability allows a local user to execute arbitrary code on the target system.
The vulnerability exists due to a boundary error when processing malformed data in a terminfo database file. A local user can trigger memory corruption and execute arbitrary code on the target system.
4) Out-of-bounds write (CVE-ID: CVE-2021-39537)
The vulnerability allows a remote attacker to compromise vulnerable system.
The vulnerability exists due to a boundary error when processing untrusted input. A remote attacker can create a specially crafted file, trick the victim into opening it using the affected software, trigger out-of-bounds write and execute arbitrary code on the target system.
5) Out-of-bounds write (CVE-ID: CVE-2020-19188)
The vulnerability allows a remote attacker to compromise vulnerable system.
The vulnerability exists due to a boundary error within the fmt_entry() function in progs/dump_entry.c. A remote attacker can send a specially crafted command to the application, trigger an out-of-bounds write and execute arbitrary code on the target system.
6) Out-of-bounds read (CVE-ID: CVE-2024-6874)
The vulnerability allows a remote attacker to gain access to potentially sensitive information.
The vulnerability exists due to a boundary condition within the curl_url_get() function when parsing IDN URLs. A remote attacker can pass a specially crafted URL to the application, trigger an out-of-bounds read error and read contents of memory on the system.
7) Improper Certificate Validation (CVE-ID: CVE-2024-2379)
The vulnerability allows a remote attacker to perform MitM attack.
The vulnerability exists due to improper certificate validation for a QUIC connection under certain conditions, when built to use wolfSSL. A remote attacker can force the application to ignore the certificate and perform MitM attack.
Successful exploitation of the vulnerability requires that the used wolfSSL library was built with the OPENSSL_COMPATIBLE_DEFAULTS symbol set, which is not set for the recommended configure --enable-curl builds.
8) Improper validation of certificate with host mismatch (CVE-ID: CVE-2024-2466)
The vulnerability allows a remote attacker to perform MitM attack.
The vulnerability exists due to libcurl does not check the server certificate of TLS connections done to a host specified as an IP address, when built to use mbedTLS. A remote attacker force the application to completely skip the certificate check and perform MitM attack.
9) Double free (CVE-ID: CVE-2024-6197)
The vulnerability allows a remote attacker to execute arbitrary code on the target system.
The vulnerability exists due to a boundary error in ASN1 parser within the utf8asn1str() function. A remote attacker can pass specially crafted TLS certificate to the application, trigger double free error and execute arbitrary code on the target system.
The vulnerable code can only be reached when curl is built to use GnuTLS, wolfSSL, Schannel or Secure Transport.
10) Improper check for certificate revocation (CVE-ID: CVE-2024-0853)
The vulnerability allows a remote attacker to bypass OCSP verification.
The vulnerability exists due to curl inadvertently keeps the SSL session ID for connections in its cache even when the verify status (OCSP stapling)
test has failed. A subsequent transfer to the same hostname will be successful if the session ID cache is still fresh, which leads to skipping the
verify status check. As a result, OCSP verification is always successful for all subsequent TLS sessions.
11) Stack-based buffer overflow (CVE-ID: CVE-2024-33599)
The vulnerability allows a remote attacker to execute arbitrary code on the target system.
The vulnerability exists due to a boundary error in nscd binary. A remote unauthenticated attacker can exhaust the nscd fixed size cache to trigger a stack-based buffer overflow and execute arbitrary code on the target system.
12) Cross-site request forgery (CVE-ID: CVE-2023-5455)
The vulnerability allows a remote attacker to perform cross-site request forgery attacks.
The vulnerability exists due to insufficient validation of the HTTP request origin. A remote attacker can trick the victim to visit a specially crafted web page and perform arbitrary actions on behalf of the victim on the vulnerable website.
13) Security Features (CVE-ID: CVE-2020-17049)
The vulnerability allows a remote user to bypass authentication process.
The vulnerability exists due to security feature bypass issue in Kerberos. A remote administrator can bypass authentication process and gain unauthorized access to the application.
14) Integer overflow (CVE-ID: CVE-2021-43618)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to integer overflow in mpz/inp_raw.c. A remote attacker can pass specially crafted data to the application, trigger integer overflow and cause a denial of service condition on the target system.
15) Input validation error (CVE-ID: CVE-2024-21742)
The vulnerability allows a remote attacker to manipulate MIME headers.
The vulnerability exists due to insufficient validation of user-supplied input when using MIME4J DOM for composing message. A remote attacker can manipulate headers inside a MIME message.
16) Information disclosure (CVE-ID: CVE-2023-4641)
The vulnerability allows a local user to gain access to potentially sensitive information.
The vulnerability exists due to an error in gpasswd(1), which fails to clean memory properly. When asking for a new password, shadow-utils asks the password twice. If the password fails on the second attempt, shadow-utils fails in cleaning the buffer used to store the first entry. A local user with enough access can retrieve the password from the memory.
17) Incorrect Regular Expression (CVE-ID: CVE-2021-3765)
The vulnerability allows a remote attacker to perform a regular expression denial of service (ReDoS) attack.
The vulnerability exists due to improper input validation when handling user-supplied input. A remote attacker can pass specially crafted data to the application and perform a regular expression denial of service (ReDoS) attack.
18) Information Exposure Through Timing Discrepancy (CVE-ID: CVE-2024-2236)
The vulnerability allows a remote attacker to perform timing attack.
The vulnerability exists due to an error in libgcrypt's RSA implementation. A remote attacker can initiate a Bleichenbacher-style attack, which can lead to the decryption of RSA ciphertexts.
19) Uncontrolled recursion (CVE-ID: CVE-2021-3997)
The vulnerability allows a local user to perform a denial of service (DoS) attack.
The vulnerability exists due to uncontrolled recursion in systemd-tmpfiles. A local user can create multiple nested directories in the /tmp folder and case systemd to crash during the system boot.
20) Buffer overflow (CVE-ID: CVE-2024-2961)
The vulnerability allows a remote attacker to execute arbitrary code on the target system.
The vulnerability exists due to a boundary error within the iconv() function when converting string to the ISO-2022-CN-EXT character set. A remote attacker can pass specially crafted input to the application, trigger a 4 byte buffer overflow and execute arbitrary code on the target system.
Successful exploitation of this vulnerability may result in complete compromise of vulnerable system.
21) Allocation of Resources Without Limits or Throttling (CVE-ID: CVE-2024-33601)
The vulnerability allows a local user to perform a denial of service (DoS) attack.
The
vulnerability exists due to the Name Service Cache Daemon (nscd) can terminate the service during its startup. A local use can perform a denial of service (DoS) attack.
22) Incorrect Regular Expression (CVE-ID: CVE-2022-31129)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to improper validation of user-supplied input when parsing overly long strings. A remote attacker can pass a string that contains more that 10k characters and perform regular expression denial of service (ReDoS) attack.
23) NULL pointer dereference (CVE-ID: CVE-2024-0727)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to a NULL pointer dereference error when processing fields in the PKCS12 certificate. A remote attacker can pass specially crafted certificate to the server and perform a denial of service (DoS) attack.
24) Resource exhaustion (CVE-ID: CVE-2023-52428)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to improper validation of user requests by the PasswordBasedDecrypter (PBKDF2) component. A remote attacker can send a specially crafted request using a large JWE p2c header, trigger resource exhaustion and perform a denial of service (DoS) attack.
25) Resource management error (CVE-ID: CVE-2023-29469)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to improper management of internal resources when working with hashes of empty dict strings. A remote attacker can and perform a denial of service (DoS) attack.
26) NULL pointer dereference (CVE-ID: CVE-2023-28484)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to a NULL pointer dereference error in xmlSchemaFixupComplexType. A remote attacker can pass specially crafted data to the application and perform a denial of service (DoS) attack.
27) Use-after-free (CVE-ID: CVE-2024-25062)
The vulnerability allows a remote attacker to compromise vulnerable system.
The vulnerability exists due to a use-after-free error in xmlValidatePopElement when using the XML Reader interface with DTD validation and XInclude expansion enabled. A remote attacker can pass a specially crafted XML document to the application, trigger a use-after-free error and execute arbitrary code on the system.
Successful exploitation of the vulnerability may allow an attacker to compromise vulnerable system.
28) Resource management error (CVE-ID: CVE-2023-3446)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to improper management of internal resources within the DH_check(), DH_check_ex() and EVP_PKEY_param_check() function when processing a DH key or DH parameters. A remote attacker can pass specially crafted data to the application and perform a denial of service (DoS) attack.
29) Resource management error (CVE-ID: CVE-2023-5678)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to improper management of internal resources within DH_generate_key() and DH_check_pub_key() functions. A remote attacker can pass specially crafted data to the application and perform a denial of service (DoS) attack.
30) Resource management error (CVE-ID: CVE-2023-3817)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to improper management of internal resources within the application when checking the long DH keys. A remote attacker can pass specially crafted data to the application and perform a denial of service (DoS) attack.
31) Link following (CVE-ID: CVE-2021-35939)
The vulnerability allows a local privileged user to escalate privileges on the system.
The vulnerability exist due to fix for CVE-2017-7500 and CVE-2017-7501 was incomplete: the check was only implemented for the parent directory of the file to be created. A local privileged user who owns another ancestor directory could potentially use this flaw to gain root privileges.
32) Buffer overflow (CVE-ID: CVE-2024-33602)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to netgroup cache assumes NSS callback is using in-buffer strings in nscd binary. A remote attacker can trigger memory corruption and perform a denial of service (DoS) attack.
33) Link following (CVE-ID: CVE-2017-7501)
The vulnerability allows a local authenticated user to execute arbitrary code.
It was found that versions of rpm before 4.13.0.2 use temporary files with predictable names when installing an RPM. An attacker with ability to write in a directory where files will be installed could create symbolic links to an arbitrary location and modify content, and possibly permissions to arbitrary files, which could be used for denial of service or possibly privilege escalation.
34) Link following (CVE-ID: CVE-2017-7500)
The vulnerability allows a local authenticated user to execute arbitrary code.
It was found that rpm did not properly handle RPM installations when a destination path was a symbolic link to a directory, possibly changing ownership and permissions of an arbitrary directory, and RPM files being placed in an arbitrary destination. An attacker, with write access to a directory in which a subdirectory will be installed, could redirect that directory to an arbitrary location and gain root privilege.
35) Time-of-check Time-of-use (TOCTOU) Race Condition (CVE-ID: CVE-2021-35937)
The vulnerability allows a local privileged user to escalate privileges on the system.
The vulnerability exist due to race condition. A local privileged user can bypass the checks that were introduced in response to CVE-2017-7500 and CVE-2017-7501, potentially gaining root privileges.
36) Link following (CVE-ID: CVE-2021-35938)
The vulnerability allows a local privileged user to escalate privileges on the system.
The vulnerability occurs when rpm sets the desired permissions and credentials after installing a file. A local privileged user can use this flaw to exchange the original file with a symbolic link to a security-critical file and escalate their privileges on the system.
37) Out-of-bounds read (CVE-ID: CVE-2023-7104)
The vulnerability allows a remote user to gain access to potentially sensitive information.
The vulnerability exists due to a boundary condition within the sessionReadRecord() function in ext/session/sqlite3session.c when processing a corrupt changeset. A remote user can send a specially crafted request to trigger an out-of-bounds read error and read contents of memory on the system or perform a denial of service attack.
38) Out-of-bounds read (CVE-ID: CVE-2023-4527)
The vulnerability allows a remote attacker to gain access to potentially sensitive information or perform a denial of service (DoS) attack.
The vulnerability exists due to a boundary condition within the getaddrinfo() function called with the AF_UNSPEC address family. A remote attacker with control over DNS server can send a DNS response via TCP larger than 2048 bytes, trigger an out-of-bounds read and crash the application or gain access to potentially sensitive information.
Successful exploitation of the vulnerability requires that system is configured with no-aaaa mode via /etc/resolv.conf.
39) NULL pointer dereference (CVE-ID: CVE-2024-33600)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to a NULL pointer dereference error when nscd cache fails to add a not-found netgroup response to the cache. A remote attacker can pass specially crafted data to the application and perform a denial of service (DoS) attack.
40) Use-after-free (CVE-ID: CVE-2023-4806)
The vulnerability allows an attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to a use-after-free error within the getaddrinfo() function. A remote attacker can perform a denial of service (DoS) attack.
41) Use-after-free (CVE-ID: CVE-2023-4813)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to a use-after-free error within the gaih_inet() function when the getaddrinfo() function is called and the hosts database in
/etc/nsswitch.conf is configured with SUCCESS=continue or SUCCESS=merge. A remote attacker can pass specially crafted data to the application and perform a denial of service (DoS) attack.
42) Insufficient verification of data authenticity (CVE-ID: CVE-2024-34397)
The vulnerability allows a local user to escalate privileges on the system.
The vulnerability exists due to missing authorization for D-Bus signals. When a GDBus-based client subscribes to signals from a trusted system service such as NetworkManager on a shared computer, other users of the same computer can send spoofed D-Bus signals that the GDBus-based client will wrongly interpret as having been sent by the trusted system service.
43) Resource exhaustion (CVE-ID: CVE-2024-2511)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to unbounded memory growth when processing TLSv1.3 sessions. A remote attacker can trigger resource exhaustion and perform a denial of service (DoS) attack.
Successful exploitation of the vulnerability requires that the non-default SSL_OP_NO_TICKET option is being used in TLSv1.3.
44) OS Command Injection (CVE-ID: CVE-2023-6004)
The vulnerability allows a remote attacker to execute arbitrary shell commands on the target system.
The vulnerability exists due to improper input validation in OpenSSH client. If an invalid user or hostname that contained shell metacharacters was passed to ssh(1), and a ProxyCommand, LocalCommand directive or "match exec" predicate referenced the user or hostname via %u, %h or similar expansion token, then an attacker who could supply arbitrary user/hostnames to ssh(1) could potentially perform command injection depending on what quoting was present in the user-supplied ssh_config(5) directive.
45) Heap-based buffer overflow (CVE-ID: CVE-2024-34459)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to a boundary error when parsing XML data. A remote attacker can pass specially crafted data to the application, trigger a heap-based buffer overflow and perform a denial of service (DoS) attack.
46) Memory leak (CVE-ID: CVE-2024-26462)
The vulnerability allows a remote attacker to perform DoS attack on the target system.
The vulnerability exists due memory leak in /krb5/src/kdc/ndr.c. A remote attacker can force the application to leak memory and perform denial of service attack.
47) Out-of-bounds read (CVE-ID: CVE-2024-37371)
The vulnerability allows a remote attacker to gain access to potentially sensitive information.
The vulnerability exists due to a boundary condition when handling GSS message token. A remote attacker can send specially crafted token to the application, trigger an out-of-bounds read error and read contents of memory on the system.
48) Input validation error (CVE-ID: CVE-2024-37370)
The vulnerability allows a remote attacker to bypass implemented security restrictions.
The vulnerability exists due to insufficient validation of user-supplied input. A remote attacker can modify the plaintext Extra Count field of a confidential GSS krb5 wrap token, causing the unwrapped token to appear truncated to the application.
49) Memory leak (CVE-ID: CVE-2024-26458)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to memory leak in /krb5/src/lib/rpc/pmap_rmt.c. A remote attacker can perform a denial of service attack.
50) Memory leak (CVE-ID: CVE-2024-26461)
The vulnerability allows a remote attacker to perform DoS attack on the target system.
The vulnerability exists due memory leak in /krb5/src/lib/gssapi/krb5/k5sealv3.c. A remote attacker can force the application to leak memory and perform denial of service attack.
51) Inadequate encryption strength (CVE-ID: CVE-2023-48795)
The vulnerability allows a remote attacker to perform MitM attack.
The vulnerability exists due to incorrect implementation of the SSH Binary Packet Protocol (BPP), which mishandles the handshake phase and the use of sequence numbers. A remote attacker can perform MitM attack and delete the SSH2_MSG_EXT_INFO message sent before authentication starts, allowing the attacker to disable a subset of the keystroke timing obfuscation features introduced in OpenSSH 9.5.
The vulnerability was dubbed "Terrapin attack" and it affects both client and server implementations.
52) Unchecked Return Value (CVE-ID: CVE-2023-6918)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to libssh does not check for returned values of message digest (MD) operations in low memory conditions. A remote attacker can terminate the connection or force the library to use weak keys.
53) Information Exposure Through Timing Discrepancy (CVE-ID: CVE-2023-5981)
The vulnerability allows a remote attacker to perform timing attack.
The vulnerability exists due to the response times to malformed ciphertexts in RSA-PSK ClientKeyExchange differ from response times of ciphertexts with correct PKCS#1 v1.5 padding. A remote attacker can perform timing sidechannel attack in RSA-PSK key exchange.
54) Resource exhaustion (CVE-ID: CVE-2023-33202)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to application does not properly control consumption of internal resources when parsing OpenSSL PEM encoded streams containing X.509 certificates. A remote attacker can send ASN.1 data through the PEMParser to trigger resource exhaustion and perform a denial of service (DoS) attack.
55) Cryptographic issues (CVE-ID: CVE-2024-28834)
The vulnerability allows a remote attacker to perform MitM attack.
The vulnerability exists due to a side-channel attack when using the gnutls_privkey_sign_data2 API function with the "GNUTLS_PRIVKEY_FLAG_REPRODUCIBLE" flag. A remote attacker can launch Minerva attack and gain access to sensitive information.
56) Information Exposure Through Timing Discrepancy (CVE-ID: CVE-2024-0553)
The vulnerability allows a remote attacker to perform timing attack.
The vulnerability exists due to the response times to malformed ciphertexts in RSA-PSK ClientKeyExchange differ from response times of ciphertexts with correct PKCS#1 v1.5 padding. A remote attacker can perform timing sidechannel attack in RSA-PSK key exchange.
Note, the vulnerability exists due to incomplete fox for #VU83316 (CVE-2023-5981).
57) Resource exhaustion (CVE-ID: CVE-2023-32611)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to application does not properly control consumption of internal resources within the g_variant_byteswap() function. A remote attacker can trigger resource exhaustion and perform a denial of service (DoS) attack.
58) Input validation error (CVE-ID: CVE-2023-29499)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to insufficient validation of user-supplied input. A remote attacker can pass specially crafted input to the application and perform a denial of service (DoS) attack.
59) Resource exhaustion (CVE-ID: CVE-2023-32665)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to application does not properly control consumption of internal resources. A remote attacker can trigger resource exhaustion and perform a denial of service (DoS) attack.
60) Input validation error (CVE-ID: CVE-2024-28182)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to reading the unbounded number of HTTP/2 CONTINUATION frames. A remote attacker can pass specially crafted input to the application and perform a denial of service (DoS) attack.
61) Resource exhaustion (CVE-ID: CVE-2023-44487)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to improperly control of consumption for internal resources when handling HTTP/2 requests with compressed HEADERS frames. A remote attacker can send a sequence of compressed HEADERS frames followed by RST_STREAM frames and perform a denial of service (DoS) attack, a.k.a. "Rapid Reset".
Note, the vulnerability is being actively exploited in the wild.
62) NULL pointer dereference (CVE-ID: CVE-2023-2953)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to a NULL pointer dereference error within the ber_memalloc_x() function. A remote attacker can send specially crafted data to the application and perform a denial of service (DoS) attack.
63) LDAP injection (CVE-ID: CVE-2023-33201)
The vulnerability allows a remote attacker to bypass authentication process.
The vulnerability exists due to improper input validation in applications that use an LDAP CertStore from Bouncy Castle to validate X.509 certificates. During the certificate validation process, Bouncy Castle inserts the certificate's Subject Name into an LDAP search filter without any escaping, which leads to an LDAP injection vulnerability. A remote non-authenticated attacker can use a specially crafted X.509 certificate to bypass authentication process and gain unauthorized access to the application.
64) Resource exhaustion (CVE-ID: CVE-2024-29857)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to library does not properly control consumption of internal resources when importing an EC certificate with specially crafted F2m parameters. A remote attacker can pass a specially crafted certificate to the application to trigger resource exhaustion and perform a denial of service (DoS) attack.
65) Resource management error (CVE-ID: CVE-2024-4603)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to improper management of internal resources within the application when checking DSA keys and parameters. A remote attacker can pass specially crafted data to the application and perform a denial of service (DoS) attack.
66) Use-after-free (CVE-ID: CVE-2024-4741)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to a use-after-free error within the SSL_free_buffers() function. A remote attacker can trigger a use-after-free error and perform a denial of service (DoS) attack.
Note, the vulnerability affects only applications that call the vulnerable function.
67) Improper access control (CVE-ID: CVE-2024-22257)
The vulnerability allows a remote attacker to gain unauthorized access to otherwise restricted functionality.
The vulnerability exists due to improper access restrictions when the "AuthenticatedVoter#vote" passing a "null" Authentication parameter. A remote attacker can bypass implemented security restrictions and gain unauthorized access to the application.
68) Use-after-free (CVE-ID: CVE-2024-0232)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to a use-after-free error within the jsonParseAddNodeArray() function in sqlite3.c. A remote attacker can pass specially crafted json data to the application and perform a denial of service (DoS) attack.
69) Heap-based buffer overflow (CVE-ID: CVE-2023-6992)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to a boundary error when handling compressed data in deflate.c. A remote attacker can pass specially crafted input to the application, trigger a heap-based buffer overflow and perform a denial of service (DoS) attack.
70) Insufficient verification of data authenticity (CVE-ID: CVE-2023-37920)
The vulnerability allows a remote attacker to perform MitM attack.
The vulnerability exist due to software recognizes "e-Tugra" root certificates, which were subject to an investigation prompted by reporting of security issues in their systems. An attacker with ability to generate certificates signed with the compromised "e-Tugra" root certificate can perform MitM attack.
71) Insufficient verification of data authenticity (CVE-ID: CVE-2023-7008)
The vulnerability allows a remote attacker to perform a MitM attack.
The vulnerability exists due to systemd-resolved accepts records of DNSSEC-signed domains even when they have no signature. A remote attacker can perform MitM attack.
72) Prototype pollution (CVE-ID: CVE-2020-7772)
The vulnerability allows a remote attacker to execute arbitrary JavaScript code.
The vulnerability exists due to improper input validation. A remote attacker can pass specially crafted input to the application and perform prototype pollution, which can result in information disclosure or data manipulation.
73) PHP file inclusion (CVE-ID: CVE-2023-2603)
The vulnerability allows a remote attacker to include and execute arbitrary PHP files on the server.
The vulnerability exists due to incorrect input validation when including PHP files in web/ajax/modal.php. A remote non-authenticated attacker can send a specially crafted HTTP request to the affected application, include and execute arbitrary PHP code on the system with privileges of the web server.
74) Memory leak (CVE-ID: CVE-2023-2602)
The vulnerability allows a remote attacker to perform DoS attack on the target system.
The vulnerability exists due memory leak in the error handling in the __wrap_pthread_create() function. A remote attacker can send a specially crafted request, exploit vulnerability to exhaust the process memory and cause a denial of service condition.
75) Out-of-bounds read (CVE-ID: CVE-2024-5535)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to a boundary condition within the SSL_select_next_proto() function when using NPN. A remote attacker can send specially crafted data to the application, trigger an out-of-bounds read and perform a denial of service (DoS) attack.
76) Observable discrepancy (CVE-ID: CVE-2024-30171)
The vulnerability allows a remote attacker to gain access to sensitive information.
The vulnerability exists due to a possible timing based leakage in RSA based handshakes. A remote attacker can gain access to sensitive information.
77) Cross-site scripting (CVE-ID: CVE-2021-4231)
The disclosed vulnerability allows a remote attacker to perform cross-site scripting (XSS) attacks.
The vulnerability exists due to insufficient sanitization of user-supplied data. A remote attacker can trick the victim to follow a specially crafted link and execute arbitrary HTML and script code in user's browser in context of vulnerable website.
Successful exploitation of this vulnerability may allow a remote attacker to steal potentially sensitive information, change appearance of the web page, perform phishing and drive-by-download attacks.
78) Information disclosure (CVE-ID: CVE-2023-46218)
The vulnerability allows a remote attacker to gain access to potentially sensitive information.
The vulnerability exists due to an error in curl that allows a malicious HTTP server to set "super cookies" that are then passed back to more origins than what is otherwise allowed or possible. A remote attacker can force curl to send such cookie to different and unrelated sites and domains.
79) Improper certificate validation (CVE-ID: CVE-2023-28321)
The vulnerability allows a remote attacker to perform MitM attack.
The vulnerability exists due to improper certificate validation when matching wildcards in TLS certificates for IDN names. A remote attacker crate a specially crafted certificate that will be considered trusted by the library.
Successful exploitation of the vulnerability requires that curl is built to use OpenSSL, Schannel or Gskit.
80) Missing Release of Resource after Effective Lifetime (CVE-ID: CVE-2024-2398)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to an error when sending HTTP/2 server push responses with an overly large number of headers. A remote attacker can send PUSH_PROMISE frames with an excessive amount of headers to the application, trigger memory leak and perform a denial of service (DoS) attack.
81) State Issues (CVE-ID: CVE-2023-27536)
The vulnerability allows a remote attacker to gain unauthorized access to otherwise restricted functionality.
The vulnerability exists due to cURL will reuse a previously created connection even when the GSS delegation (CURLOPT_GSSAPI_DELEGATION) option had been changed that could have changed the user's permissions in a second transfer. libcurl keeps previously used connections in a connection pool for subsequent transfers to reuse if one of them matches the setup. However, this GSS delegation setting was left out from the configuration match checks, making them match too easily, affecting krb5/kerberos/negotiate/GSSAPI transfers.
82) External control of file name or path (CVE-ID: CVE-2023-38546)
The vulnerability allows an attacker to inject arbitrary cookies into request.
The vulnerability exists due to the way cookies are handled by libcurl. If a transfer has cookies enabled when the handle is duplicated, the
cookie-enable state is also cloned - but without cloning the actual
cookies. If the source handle did not read any cookies from a specific
file on disk, the cloned version of the handle would instead store the
file name as none (using the four ASCII letters, no quotes).
none - if such a file exists and is readable in the current directory of the program using libcurl. 83) Expected behavior violation (CVE-ID: CVE-2023-28322)
The vulnerability allows a remote attacker to gain access to sensitive information.
The vulnerability exists due to a logic error when sending HTTP POST and PUT requests using the same handle. The libcurl can erroneously use the read callback (CURLOPT_READFUNCTION) to ask for data to send, even when the CURLOPT_POSTFIELDS option has been set, if the same handle previously was used to issue a PUT request which used that callback. As a result, the application can misbehave and either send off the wrong data or use memory after free or similar in the second transfer.
84) Out-of-bounds write (CVE-ID: CVE-2023-4016)
The vulnerability allows a local user to escalate privileges on the system.
The vulnerability exists due to a boundary error when processing untrusted input. A local user can trigger an out-of-bounds write and execute arbitrary code with elevated privileges.
85) Infinite loop (CVE-ID: CVE-2024-30172)
The vulnerability allows a remote attacker to perform a denial of service (DoS) attack.
The vulnerability exists due to infinite loop in the Ed25519 verification code. A remote attacker can pass a specially signature and public key to the application, consume all available system resources and cause denial of service conditions.
Remediation
Install update from vendor's website.